Titanium Strip
HEXON Metal supply Titanium strip and Titanium foil for producing sound film, stamping parts, fuel cell, medical component such as pacemaker and etc. For titanium Gr5 (6Al-4V), we can successfully supply strips and coils with thickness equal to or less than 0.1 mm in good surface and planarity.
The most common use for titanium as a thin foil is in shavers, as there is many company that manufactures razors and use titanium in their marketing efforts. The windscreen is the application where you most likely can find titanium foil as a non-corporate user. Titanium foil has also been used in making of the camera shutters, a most unseen and unknown device hidden inside a camera that allows light to pass for a short period of time, for the purpose of exposing film or an electronic sensor to light to make a photo. If you’re engaging in making something out of titanium in the form of foil, just remember that titanium foil is about the same thickness as a sheet of paper. You can build wind shavers, screens, wind screen, camera shutters, or what ever you can imagine.
Available grades
▲ Commercially pure (Grade 1-Grade 4)
▲ Ti-6Al-4V (Grade 5)
▲ Ti-6Al-4V ELI (Grade 23)
▲ Ti-0.2Pd (Gr7)
▲ Ti-3Al-2.5V (Gr9)
▲ Ti-15333 (Ti-15V-3Cr-3Al-3Sn)
** Please contact us if required grades above unlisted
Dimension
▲ Thickness from 0.0025 mm to 0.3 mm for pure titanium
▲ Thickness from 0.06 mm to 0.3 mm for Gr5 Ti6Al4V
▲ Width up to 610 mm, cut to size by slitting
** Spooled strip and foil available
Temper / hardness
▲ Soft by full vacuum annealed
▲ 2/1 hard
▲ 1/4 hard
▲ Custom-made temper
Quality condition
▲ As-cold rolled (metallic luster)
▲ No burr, dent, rolling mark, finger mark, pore, and other minor imperfections
▲ Strip and foil in single piece, coiled or spooled on carrier
▲ Flatness equal or better than ASTM B265
Certification
EN 10204 3.1
EN 10204 3.2 (SGS)
Specification
ASTM B265
ASTM F67
ASTM F136